11PLUMBING AND DRAINAGE OPTIONS
ADishDrawer® with Waste Disposal
B | DishDrawer® using Air Break |
| with Drain Hose Joiner |
CDishDrawer® and Standpipe
Ø 1 ½” (38 mm)
If space is limited for fixing, push hose through drain hose support to required height
3Supplied drain hose joiner (ø 3/4” (19 mm)) waste tee)
1
” |
| |
¾ mm) | ||
34 | 5 | |
. | ||
882 | ||
- | ||
” | ||
½ | ||
- | ||
29 | (750 | |
|
Ensure drain hose is routed straight to joiner. Remove excess drain hose material if necessary. Do not shorten the inlet hose.
Connect the Inlet Hose
29 ½” - 34 ¾” (750 - 882.5 mm)
2
HIGHLOOP min. 6” (150 mm)
min. R 8 ” (200 mm)
Supplied drain hose joiner (ø 3/4” (19 mm)) waste tee)
Air Break | 1 |
|
37 3⁄8” (950 mm) Max. height to top of Air Break (countertop or wall mounted)
min. R 8 ” (200 mm)
Ensure drain hose is routed straight to joiner. Remove excess drain hose material if necessary. Do not shorten the inlet hose.
Connect the Inlet Hose
If space is limited for fixing, push |
| mm) | |||
hose through drain hose support |
| ||||
to required height | ¾” | ||||
|
|
| |||
max. | - 882.5 | ||||
4¾” |
|
| 34 | ||
(120 |
|
| - | ||
mm) |
|
| ½” | ||
| |||||
1½” | 29 (750 | ||||
| 2 | ||||
(38 mm) |
1
| ) |
| |
¾ mm |
| ||
” |
|
| |
34 | . | min. R 8 ” | |
5 | (200 mm) | ||
| |||
- | 882 | ||
” |
| ||
½ - |
| ||
29 | (750 |
| |
|
|
Connect the Inlet Hose
|
| No leaks! |
|
| No leaks! |
|
| No leaks! |
4 | 180o | 6 | 2 | 180o | 4 | 3 | 180o | 5 |
5 | 3 | 4 |
Fit the supplied | Tighten with | Fit the supplied | Tighten with | Fit the supplied | Tighten with |
rubber washer. | wrench. | rubber washer. | wrench. | rubber washer. | wrench. |
|
|
|
|
|
|
7 | 5 | 6 |