4PARTS SUPPLIED

Drain hose

Drain hose

Wire clip (1)

Side mounting

Clamp (1)

Phillips

1½” (38 mm)

Rubber

Moisture protection

support (1)

joiner (1)

 

bracket kit

 

5⁄8” (16 mm)

bottom

washer for

tape (1)

 

 

 

(A and B) (2)

 

screws (7)

fixing screws

inlet hose (1)

(to prevent moisture

 

 

 

OPTIONAL

 

 

& metal

 

damage)

 

 

 

 

 

 

washers (2)

 

 

If the Drain hose supplied is not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose by 11’ 10” (3.6m). The kit is available from the nearest Fisher & Paykel Authorized Service Agent, or Toll free 1.888.936.7872 or www.fisherpaykel.com.

Edge protector (1) (if services hole partition is metal)

5CAVITY PREPARATION

Important!

Be sure the edges of the services hole are smooth or covered. If the services hole is through a metal partition the hole must be protected with the Edge protector supplied to prevent damage to the power cord or hoses.

These marks indicate formed bracket screw locations.

*Preferred position. If adequate clearance, services hole can be higher.

If hole is higher, ensure drain hose(s) are routed straight into the waste connection.

Water Connection

Recommended HOT (Maximum 140°F/60°C).

Supplied hose to suit 3/8” (9 mm) male compression fitting.

3⁄8” (10 mm)

min. 1⁄16” (2 mm)

Moisture protection tape must be applied.

2” x 4”

2 ½

 

(65 mm)

 

 

 

 

 

If no side partition, use a brace for securing.

Note:

Services

can be located

 

.

side of DishDrawer®

either

 

 

 

 

Water Pressure

Max

Min

Water softener models

1 MPa (145 psi)

0.1 MPa (14.5 psi)

Other models

1 MPa (145 psi)

0.03 MPa (4.3 psi)

Important!

The power outlet must be located in a cabinet adjacent to the DishDrawer cavity.

max.

ø1 ½” (38 mm)

*

Water supply

 

Max. distance of

Left hand

Right hand

hoses and cord from

side

side

chassis edge

 

 

min. 7 7⁄8

Drain hose

78 ½”

59 1⁄16”

 

(2000 mm)

(1500 mm)

 

 

 

Inlet hose

64 ¾”

37 3⁄8”

 

(1650 mm)

(950 mm)

 

 

 

Power cord (excl. plug)

29 ½”

15 ¾”

 

(750 mm)

(400 mm)

 

 

 

Left hand

side

Right hand

side

(200 mm)

Important!

110-120 VAC / 7 A

Adjacent cabinetry must not extend above cavity base

Page 3
Image 3
Fisher & Paykel DD36S Parts Supplied, Cavity Preparation, Moisture protection tape must be applied, Max

DD36S specifications

Fisher & Paykel has long been recognized for its innovative approach to home appliances, and the DD36S is no exception. This double-drawer dishwasher combines elegant design with cutting-edge technology, making it a standout choice for homeowners who seek efficiency and versatility in their kitchen.

One of the main features of the DD36S is its unique double-drawer design. Unlike traditional dishwashers that have a single large compartment, this model offers two independent drawers. This allows users to run smaller loads in one drawer while saving energy and water, making it a perfect fit for busy households. Each drawer has its own wash cycle options, enabling the user to customize the wash according to their specific needs, whether it's a quick wash for lightly soiled dishes or a more intensive cycle for heavily soiled pots and pans.

The DD36S is also packed with advanced technologies that enhance its performance. With SmartDrive technology, the dishwasher features a direct drive motor that utilizes fewer moving parts, resulting in quieter operation and increased reliability. This motor adapts to the load and adjusts the water usage accordingly, providing a thorough clean while minimizing waste. The unit is also designed with Eco-Friendly features, incorporating energy-efficient wash cycles that help reduce environmental impact without compromising cleaning effectiveness.

Another standout characteristic of the DD36S is its flexibility in loading. The adjustable racks and customizable configurations make it easy to fit a wide variety of dish sizes and shapes, from delicate wine glasses to large casserole dishes. The dishwasher also includes convenient features such as an advanced drying system, which uses a combination of fans and condensation drying to ensure dishes come out dry and spotless.

Fisher & Paykel further enhances the user experience with intuitive controls and sleek aesthetics. The DD36S boasts a modern design that seamlessly integrates into any kitchen decor, and its easy-to-use interface allows for simple cycle selection and monitoring. With a focus on user convenience, this unit also features a delayed start option, allowing users to run the dishwasher at a more convenient time.

In conclusion, the Fisher & Paykel DD36S double drawer dishwasher embodies a perfect combination of functionality, efficiency, and design. Its innovative features and technologies not only enhance its performance but also cater to the diverse needs of modern households, making it a worthy investment for anyone looking to elevate their kitchen experience.