6SLIDE BRACKETS TO SUITABLE HEIGHT SETTING
There are three
height settings.
Slide brackets to
preferred height setting.
Low setting | Factory setting | High setting |
- 1⁄16”(1.5 mm) |
| + 1⁄16”(1.5 mm) |
8RECONNECT CONTROLS
2
7TIGHTEN PANEL BRACKETS
Tighten these screws
Replace these fixing screws
Tighten these screws
9REATTACH PANEL
2
1
WARNING !
Electrical Shock Hazard
Connect the ground (earth) wire of the controls
to one of the two tabs provided on the panel bracket. To ground (earth) the panel bracket, connect the ground (earth) wire from the product to the other tab.
Failure to follow these warnings may result in electrical shock, injury or fire.
1
Push the
panel in then up to locate.
Important!
Ensure the rubber seal between the drawer and panel is kept in place.
2