6ROUTE BADGE THROUGH PANEL
1 |
2 |
8RECONNECT BADGE
2
1
WARNING !
Electrical Shock Hazard
Connect the integrated badge ground (earth) wire to one of the two tabs provided on the panel bracket. To ground (earth) the panel bracket, connect the ground (earth) wire from the product to the other tab.
Failure to follow these warnings may result in electrical shock, injury or fire.
7SECURE PANEL BRACKET TO PANEL
Important! |
Use all 14 screws provided as shown.
| 2 |
1 | 5⁄8”(16 mm) |
x14 |
9REATTACH PANEL
2 | Important! |
| Ensure the rubber seal |
| between the drawer and |
| panel is kept in place. |
1 |
|
Push the panel | 2 |
in then up to | |
locate. |
|
www.fisherpaykel.com www.fisherpaykel.ca www.fisherpaykel.co.nz www.fisherpaykel.com.au www.fisherpaykel.co.uk www.fisherpaykel.ie | 590018A US CA NZ AU GB IE 03.10 |