Manuals / Fisher & Paykel / Kitchen Appliance / Dishwasher

Fisher & Paykel DD605 Plumbing and drainage - OPTION 1 connection, Double Models, 180o, washer

Models: DD605

1 28

Page 11

Plumbing and drainage - OPTION 1 (connection)

Plumbing and drainage - OPTION 1 (connection)		9
DishDrawer® and Standpipe Ø38 mm

7	If space is limited
	for fixing, push hose
	through drain hose
	support to required
	height

max. 750-

120 882.5

mm mm

38 mm

DOUBLE MODELS

8
1
Fit supplied	180o
washer	180o
	2
	3
4

Page 11

Image 11

Fisher & Paykel DD605 Plumbing and drainage - OPTION 1 connection, DishDrawer and Standpipe Ø38 mm, Double Models, 180o

Contents

DD605 and DS605 models Installation instructionsDishDrawer NZ AU GB IECut Hazard Safety and warningsImportant safety precautions Electrical hazardSAVE THESE INSTRUCTIONS ContentsDOUBLE MODELS 2Product dimensionsDOUBLE MODELS Cabinetry dimensionsCabinetry dimensions mm Minimum clearances mmto prevent moisture 4Cavity preparationParts supplied DOUBLE MODELSDOUBLE MODELS Route the hoses and move into the cavity3 3 optional30 mm 6Removing the tub and levelling the productB B A A Securing the product and refitting the tubDOUBLE MODELS optionalDOUBLE MODELS 8Plumbing and drainage - OPTIONPower cord DishDrawer and Standpipe Ø38 mm180o Plumbing and drainage - OPTION 1 connectionDishDrawer and Standpipe Ø38 mm DOUBLE MODELSHIGHLOOP 10Plumbing and drainage - OPTIONDishDrawer using sink trap with drain hose joiner DOUBLE MODELSDOUBLE MODELS Plumbing and drainage - OPTION 2 connectionDishDrawer using sink trap with drain hose joiner D o not overtighten screw Fitting the toekickDOUBLE MODELS Page SINGLE MODELS 14Product dimensionsB D A C Cabinetry dimensionsCabinetry dimensions mm SINGLE MODELSmin. 4.5 A 16Cavity preparationCavity SINGLE MODELSEnsure hoses and cord Route the hoses and move into the cavitySINGLE MODELS Tie together to avoid kinkingSINGLE MODELS 18Removing the tub and securing the productEnsure the tub is Refitting the tubEnsure the tub clips on 5 both sides are reset SINGLE MODELSSINGLE MODELS 20Plumbing and drainage - OPTIONPower cord DishDrawer and Standpipe Ø38 mm180o Plumbing and drainage - OPTION 1 connectionDishDrawer and Standpipe Ø38 mm SINGLE MODELSHIGHLOOP 22Plumbing and drainage - OPTIONDishDrawer using sink trap with drain hose joiner SINGLE MODELSIf space is limited Plumbing and drainage - OPTION 2 connectionDishDrawer using sink trap with drain hose joiner SINGLE MODELSRepeat for each Drawer Final checklistTroubleshooting Page Part No. 529322 A NZ AU GB IE

Plumbing and drainage - OPTION 1 (connection)

DishDrawer® and Standpipe Ø38 mm

Fit supplied

180o

washer