Manuals / Fisher & Paykel / Kitchen Appliance / Dishwasher

Fisher & Paykel DS605I, DD605I Safety and warnings, Cut Hazard Take care - panel edges are sharp

Models: DD605I DS605I

1 12

Download 12 pages 31.96 Kb

Page 2

Image 2

Safety and warnings

WARNING!

Cut Hazard

Take care - panel edges are sharp.

Failure to use caution could result in injury or cuts.

Important!

Read these instructions completely and carefully. Ensure the product is not plugged in.

Installation of DishDrawer® panels requires basic mechanical and electrical skills. Installation must comply with your local building and electricity regulations.

Failure to install the DishDrawer panels correctly could invalidate any warranty or liability claims.

Page 2

Image 2

Fisher & Paykel DS605I, DD605I manual Safety and warnings, Cut Hazard Take care - panel edges are sharp

Contents

DishDrawer DS605I and DD605I modelsIntegrated panel preparation NZ AU GB IEFailure to use caution could result in injury or cuts Safety and warningsCut Hazard Take care - panel edges are sharp Reconnecting the wires and fitting the ContentsPanel Installation SAVE THESE INSTRUCTIONSwidth of ALL panels 2 Product preparationDouble DishDrawer models height of upper panelIntegrated Panel material Product preparationToe kick preparation Parts suppliedwidth of the panel 4 Product preparationSingle DishDrawer models height of the panelIntegrated Panel material if installingProduct preparation Parts suppliedEnsure the product is not plugged in 6 Badge cut-out, handle and mounting bracket228.5 BadgeDouble models only Securing the mounting bracketsBreak off the tab at the top of the Lower Mounting Bracket 16 mm16 mm Reconnecting the wires and fitting the panelsand a custom toe kick double models only Ensure the rubber seal between the drawer and panels is kept in placePage Copyright Fisher & Paykel 2007. All rights reserved NZ AU GB IE DishDrawer integrated panel preparation Published 06/2007Part No. 529712 A