Fisher & Paykel DD605I, DS605I manual Securing the mounting brackets, Double models only, 16 mm

Models: DD605I DS605I

1 12

Page 9

Important!

of the Lower Mounting Bracket

Image 9

Contents

Integrated panel preparation DS605I and DD605I modelsDishDrawer NZ AU GB IESafety and warnings Cut Hazard Take care - panel edges are sharpFailure to use caution could result in injury or cuts Panel Installation ContentsReconnecting the wires and fitting the SAVE THESE INSTRUCTIONSDouble DishDrawer models 2 Product preparationwidth of ALL panels height of upper panelToe kick preparation Product preparationIntegrated Panel material Parts suppliedSingle DishDrawer models 4 Product preparationwidth of the panel height of the panelProduct preparation if installingIntegrated Panel material Parts supplied228.5 6 Badge cut-out, handle and mounting bracketEnsure the product is not plugged in BadgeBreak off the tab at the top of the Lower Mounting Bracket Securing the mounting bracketsDouble models only 16 mmand a custom toe kick double models only Reconnecting the wires and fitting the panels16 mm Ensure the rubber seal between the drawer and panels is kept in placePage NZ AU GB IE DishDrawer integrated panel preparation Published 06/2007 Part No. 529712 ACopyright Fisher & Paykel 2007. All rights reserved