Fisher & Paykel manual DS605I and DD605I models, Integrated panel preparation, DishDrawer

Models: DD605I DS605I

1 12

Page 1

Image 1

Contents

Integrated panel preparation DS605I and DD605I modelsDishDrawer NZ AU GB IECut Hazard Take care - panel edges are sharp Safety and warningsFailure to use caution could result in injury or cuts Panel Installation ContentsReconnecting the wires and fitting the SAVE THESE INSTRUCTIONSDouble DishDrawer models 2 Product preparationwidth of ALL panels height of upper panelToe kick preparation Product preparationIntegrated Panel material Parts suppliedSingle DishDrawer models 4 Product preparationwidth of the panel height of the panelProduct preparation if installingIntegrated Panel material Parts supplied228.5 6 Badge cut-out, handle and mounting bracketEnsure the product is not plugged in BadgeBreak off the tab at the top of the Lower Mounting Bracket Securing the mounting bracketsDouble models only 16 mmand a custom toe kick double models only Reconnecting the wires and fitting the panels16 mm Ensure the rubber seal between the drawer and panels is kept in placePage Part No. 529712 A NZ AU GB IE DishDrawer integrated panel preparation Published 06/2007Copyright Fisher & Paykel 2007. All rights reserved