Using your dishwasher
11
2 | 1 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 4
Fig. 3 Dishwasher control panel
Control panel features
1On/Off button 
turns the dishwasher on or off
2Rinse aid indicator light
glows red when the rinse aid levels is low, reminding you to refill the rinse aid. See ‘Using rinse aid’.
3Start/pause/cancel button 
used to start, pause or cancel a wash programme
4Digital display
shows the programme steps, the time remaining until the end of a wash programme and warning messages
Running a wash programme
1Turn on the water tap.
2Connect the dishwasher plug into the power outlet.
3 Load the dishes. See section ‘Loading the dishwasher’.
4 Check that both the upper and lower spray arms can rotate freely.
5Add detergent. See section ‘Adding dishwasher detergent’
6Turn the dishwasher on by pressing the 
button. HELLO and then 
PRESS TO WASH will show on the display. The illuminated ring around the 
button will light up.
7Check the rinse aid light. If it is red, fill the rinse aid dispenser. See section ‘Using rinse aid’.
8Start the programme by pressing the 
button. (You may have to deactivate the keylock first. See ‘To deactivate the keylock manually’ for instructions.)
The dishwasher will automatically select the best programme for the particular load. At the end of the programme the dishwasher will play a tune and the word END will appear on the display.
9Press the 
button to turn the dishwasher off.
10 Turn the water tap off.
11 Disconnect the dishwasher plug from the power outlet.
12 Let dishes cool in the dishwasher for 15 minutes before unloading. Leave the door ajar during this time to help the dishes dry faster.
Important!
Never leave the door in a fully open position, as this could create a tripping hazard.
