Using your dishwasher 13
Pausing a wash programme after the keylock has been automatically activated
1Deactivate the keylock (see instructions above).
2When the display shows KEY LOCK DEACTIVATED, press the 
button. The display will show PAUSED and then PRESS TO CONTINUE.
Note: If your dishwasher has been paused for more than 30 seconds, you will need to deactivate the keylock again before you can resume the wash programme.
3Press the 
button again to resume the wash programme.
Cancelling a wash programme after the keylock has been automatically activated
1Deactivate the keylock (see instructions above).
2When the display shows KEY LOCK DEACTIVATED, press the 
button until PAUSED is displayed.
3 Keep the button held down while the display counts down: CANCEL 5.. 4.. 3.. 2.. 1
4When CANCEL appears on the display by itself, release the button.
The word CANCELLING will flash on the display for 45 seconds, followed by CANCELLED and a short tune.
5Now you may either turn the dishwasher off by pressing the 
button or press the 
button to start a new wash programme.
Note: cancelling a wash programme before it is complete may result in detergent staying in the machine and on the dishes.
