Fisher & Paykel E440T manual Bottle Rack, Solid Freezer Bins 635 Wide Models

Active Smart™ Special Features

Divider Instructions (680 and 790 Wide Models Where Fitted)

To fit the divider, insert divider into bin on an angle, straighten and slot into place. To adjust the divider, fully extend the bin, partially lift the divider, slide sideways and re-slot into position.

Bottle Rack

The bottle rack can be used to store a variety of bottles and can be positioned anywhere you would a shelf. To re-position, lift the rear of the rack and pull forward. Bottles are best stored with the top facing the front of the refrigerator.

Solid Freezer Bins (635 Wide Models)

Remove by pulling the bin out until it stops. Remove the white clips from both sides by pulling upward, then continue to slide the bin out. Clean in warm, soapy water. To reassemble, slide the bins back into the runners and replace the white clips.

Slide the bin back to its original position.

Remove the white clip to slide bin out.

Clip in place for normal usage.

Upper Freezer Shelf (635 Wide Models)

To remove for cleaning firstly pull out top bin to allow easy access to shelf. Using the front of the shelf lift the back edge of the shelf and pull forward. Clean in warm soapy water and slide back into position until it clicks into place.

12