Water filter
To reset filter indicator
Important!
We recommend the water filter is used from installation.
Do not reset monitor before filter is changed or filter monitoring will be inaccurate.
Press and hold 
and 
buttons for 4 seconds to reset the filter indicator.
If present the 
icon in the 
screen will disappear when reset.
19
To disable filter indicator
Note: if disabled, you will not be reminded to change your filter.
When no filter is to be fitted, you can disable the filter indicator.
Press and hold 
, 
and 
buttons for 4 seconds to turn this feature off/on.
When activated or deactivated the 
icon will flash and on or off will be displayed in the
screen.
We recommend that you do not disable the filter indicator if you have a filter fitted to the connection.
Important!
To avoid serious illness or death, do not use the water filter where water is unsafe or of unknown quality without adequate disinfection before or after use of filter.
The water filter cartridge needs to be changed when the filter indicator icon flashes on the interface panel.
We recommend the water filter cartridge is replaced when the 
icon flashes. This will happen every 6 months or 2800 L.
If the water filtration system has been allowed to freeze, replace filter cartridge.
If system has not been used for several months and water has an unpleasant taste or odour, flush system by dispensing 3 L or 3 qt of water. If unpleasant taste or odour persists, change filter cartridge.
