Electronic dryer

Temperature settings

This dryer has 3 temperature settings; regular, low and airing.

The REGULAR setting is for drying most fabrics. The LOW setting is for drying delicates and synthetics. It is half heat so the temperatures are lower for maximum care of the fabrics.

The AIRING setting is a cycle designed to freshen up garments. The airing setting operates only on the 1 hour manual cycle.

The regular and low settings will operate on both the manual and the auto–sensing cycles.

Delay start

DELAY START will delay the start of the drying cycle by 3, 6 or 9 hours.

1 Select drying cycle.

2Press DELAY START once for a delay of 3 hours.

Press again for 6 hours, a third time for 9 hours and again to return to normal.

Selecting DELAY START will cancel the ‘beeping’ at the end of the cycle.

Note: the DELAY START will not operate when the 1 hour manual cycle is selected.

Important!

Do not leave non-colourfast materials to sit wet in the dryer as the dye may run.

Wrinkle guard

Use WRINKLE GUARD to minimise the creasing that occurs when the clothes are left to sit in the dryer.

At the end of the cycle the drum will rotate briefly every 5 minutes while cool air is blown through the clothes. WRINKLE GUARD will continue for 12 hours or until the dryer is turned off. The dryer will beep to remind you that the cycle is finished.

WRINKLE GUARD can be turned on or off at any time during the cycle.

15

Page 17
Image 17
Fisher & Paykel AD55, ED56, AD39 installation instructions Temperature settings, Delay start, Wrinkle guard