Fisher & Paykel OR120 installation instructions Clock and timer

Clock and timer

Buttons

23

Timer
Cooking time
End of cooking time
Manual position; and cancels the set program
Decreases the number shown on the display
or changes the volume of the beeps
Increases the number shown on the display	Fig. 20 Clock display and control buttons

Illuminated symbols

AUTO - flashing - oven in automatic position but not set

AUTO - steady illumination - oven set for automatic cooking

- timer in operation

AUTO - flashing and timer beeping when you have set automatic cooking time - program error (The time of day lies between the calculated cooking start and end time.)

Setting the clock

When first connected, or after a power failure longer than 15 seconds, ‘0.00’ and AUTO will flash on the display. To set the clock, press the button and then the and buttons. Note: changing the time will delete any automatic program.

Using the timer

You can use the timer at any time, even when the oven is not in use. The timer does not turn the oven off.

You can set the timer for up to 23 hours and 59 minutes.

To set the timer, press the button briefly, then the and buttons to set the time you want. After a few seconds, the clock will show the time of day with the symbol in the display.

To check the remaining time, press the button.

To cancel the timer, press the button and then reset the time to ‘0.00’ by pressing the button. Press the button to turn the timer off.

When the time is up, the timer will beep. Press the button to turn the timer off.

Setting the timer volume

You can choose between three levels of volume for the timer beeps. To adjust the volume:

1Check the clock is set and the timer is not running.

2 Press and hold the button. The timer will beep.

3 Release the button and re-press to hear the next level of volume. The last level selected is stored.

Note: if the power to the oven is cut, then the beep volume will reset to the loudest level.