34
Care and cleaning
Cleaning the burner parts and trivets
You can remove and clean these parts with hot soapy water or
After cleaning, check that the burners and their flame spreaders are dry before replacing correctly.
It is very important to check that the burner flame spreader and the cap have been correctly positioned. Failure to do so can cause serious problems.
Note: to avoid damage to the electric ignition, do not try to light a burner without all burner parts in place.
Replacing the burners
Carefully replace the burner parts as per the following Figs.
Check that:
The ignitor is always clean to ensure
The probe is always clean to ensure correct operation of the safety valves.
Note: both the ignitor and probe must be very carefully cleaned using a toothbrush and methylated spirits.
Cap
Flame 
spreader
Probe
Ignitor
Fig. 34 Correct | Fig. 35 Replacing the |
