Fisher & Paykel OR90SDBSI installation instructions Storage compartment, Replacing the oven lamp

Models: OR90SDBSI

1 52
Download 52 pages 35.13 Kb
Page 37
Image 37

Storage compartment

The storage compartment is accessible through the pivoting panel (Fig.31).

Important!

Do not store flammable material in the oven or in the storage compartment.

Care and cleaning 35

Pivoting panel

Fig. 31 Storage compartment

Replacing the oven lamp

1Turn the power to the cooker off at the wall.

2Let the oven cavity and the heating elements cool down.

3 Twist the lamp cover off.

4 Remove and replace the halogen lamp with a new one suitable for high temperatures (300oC) with the following specifications: 220-240V, E14 and same wattage as the lamp being replaced (check wattage stamped on the lamp).

Important!

Never replace the bulb with bare hands; contamination from your fingers can cause premature failure. Always use a clean cloth or gloves.

5Twist the lamp cover back on

6 Set the clock.

Note: oven bulb replacement is not covered by your warranty.

Left lamp

Left halogen

cover

lamp

Right halogen

Right lamp

lamp

cover

Fig.32 Replacing the oven lamp

Page 37
Image 37
Fisher & Paykel OR90SDBSI Storage compartment, Replacing the oven lamp, Turn the power to the cooker off at the wall