Installation instructions
7
Dotted line showing
Locating the area for electrical connectionthe position of the cooker when installed
Area for electrical connection
Fig. 2 Area for electrical connection
256.5 - 281.5 mm (*)
Fitting the adjustable feet
(*)Depending on feet adjustment
Important!
It is possible to install the cooker above a plinth without fitting the adjustable feet.
In that case the cooker will stand directly above the plint; make sure you provide safety measures to keep it in place.
Fit the adjustable feet before using the cooker.
1Rest the rear of the cooker on a piece of the polystyrene packaging, exposing the base for fitting the feet.
2Fit the four feet by screwing them tight into the support base as shown.
Levelling the cooker
Level the cooker by screwing the feet in or out, as shown in Fig.5.
Fig. 3 Location of feet | Fig. 4 Top of feet to be | Fig. 5 Levelling the cooker |
| screwed in tightly |
|
|
|
|
|
|
|
