AUX OPERATION
Auxiliary mode allows for playing of an auxiliary audio source that is connected by a commercial auxiliary cord to the AUX IN jack of this unit.
AUX CONNECTION................................................... | 1 |
Connect the auxiliary audio source to the AUX IN jack of this unit with a commerci | |
SELECTING AUX MODE............................................ | 2 |
Press the CD/AUX button to switch from radio or CD player mode. Pressing the button will change the“CD ORmodeAUX SELECTIONas explainedBUTTON (CD/ in
AUX)” in page 8.
CAUTION
•Before connection, set the volume for this unit to “ 0 ” and also keep the volume of the auxiliary audio source within a range that will not cause distortion.
Notes
Noise may be emitted if the following actions are performed. Be sure to turn off this unit or switch to another mode before performing these actions.
•The auxiliary audio source is turned off.
•The auxiliary cord is connected to or disconnected from the auxiliary audio source or the AUX IN jack of this unit.
Notes
•Please consult with an authorized SANYO mobile audio dealer where this unit was bought for details about whether a given auxiliary audio source can be connected and the proper auxiliary cord to use.
•The volume and tone controls of the auxiliary audio source can be adjusted on this unit.