Notes

•When using a two-speaker installation, the Green, Green/Black, Violet, Violet/Black wires, which are used for a four-speaker installation, are not used. The ends of these wires must be covered with electrical tape to prevent them from shorting to the unit or the vehicle chassis.

•When using a two-speaker installation, set the FADER control to the center position.

•When fuse replacement is necessary remove

the blown fuse by using pliers. Then install the new 15 amp. fuse.

Fuse 15ANG OKBurnt

LINE OUT CONNECTIONS

•The unit has a line output terminals. You can use a separate amplifier to upgrade your system.

RCA Line-out Jacks (For Speakers)

•Connect a patch cable (not supplied) from the White (left channel) and Red (right channel) RCA line output jacks to the line input terminals of the external amplifier.

-23-