• At an angle, fit reflector over
new light bulb.
• Align notch in reflector with
tab in light bulb receptacle.
• Push reflector lens slightly
and fit reflector edges
into grooves in light bulb
compartment cover.
13
Notch
Tab
Groove
• Replace retainer and insert
two screws.
• Tighten screws with a Phillips
screwdriver.Do not over-tighten.
• Fit light bulb compartment
door into back of transmitter.
Press light bulb compartment
door to “snap”into place.
• Tighten screws in light bulb
compartment door with
Phillips screwdriver.Do not
over-tighten.
Light Bulb
Compartment Door
4
5
6