Testing Sound Reception
Test transmitter transmission and remote control receiver reception.
Power/Volume Dial
Power/Volume
Dial
Power
Power
Indicator
Indicator
Place transmitter in room in which you intend to use it. Rotate transmit- ter power/volume dial to turn power on. Turn on a radio.
Place remote control receiver in room in which you intend to use it. Rotate power/volume dial to turn power on. Adjust remote control receiver location.
BUZZZZ
Adjust
Channel
STATIC
•Variable light display lights when sound is received by remote control receiver:
-One or two dots light for shallow sounds.
-Three or more dots light for louder sounds.
•If you experience interference (buzzing or static, etc.) while using one channel setting, switch both units to other channel. Selecting a channel is usually a one time adjustment.
Hint: All four dots in remote control receiver variable light display light:
-If you turn remote control receiver power on before transmitter power. You will also hear static noise. Turn volume down and turn transmitter power on.
-If the remote control receiver is too far away from the transmitter. Move the remote control receiver closer to the transmitter.
-If loud sounds are transmitting.
5
