Assembly
TM
•Insert a #8 x 1" screw into each of the two inner screw
holes in the top of the front bumper.
•Tighten the screws with a Phillips screwdriver.Do not
over-tighten.
•Insert a #8 x 1" screw into each of the two outer screw
holes in the top of the rear bumper.
•Tighten the screws with a Phillips screwdriver.Do not
over-tighten.
Inner
Holes
Front Bumper
Rear Bumper
Outer
Holes
12 Right
Taillight
Lens
Left
Taillight
Lens
Left Right
Slots
Tab
13
•Using safety scissors, remove the taillight lenses from
the plastic connector.Dispose of the plastic connector.
•Face the rear of the vehicle.
•Insert the tabs on the back of the right and left taillight
lenses into the taillight slots in the vehicle body.
Please Note: The left and right taillight lenses are NOT
interchangeable.
•Press firmly to snap the tabs into the slots.
14
Pegs
Tailgate
Tailgate
Openings
Flat Side
•Position the tailgate with the flat side facing up.
•Fit the peg on one side of the tailgate into the tailgate
opening in the rear of the vehicle body.
•Slide the peg on the other side of the tailgate into the
tailgate opening in the other side of the vehicle body.
•Lift the tailgate and press firmly to snap it closed.
12