Assembly |
|
| |
12 | 14 | #8 x 1" Screws | #8 x 1" Screws |
|
| ||
|
|
| |
Hood Latch |
| Windshield |
|
|
| Brackets |
|
Hole |
|
|
|
Hood |
|
|
|
Latch |
|
|
|
Hole |
|
|
|
| • With the flat sides of the windshield brackets facing the | ||
• Insert a hood latch into one of the holes in the vehicle | dash, fit the screw pegs on the windshield brackets into | ||
body, near the hood area. | the holes in the top surface of the dash. |
| |
• | Twist the base of the hood latch 1/4 turn to secure it in | • Insert two #8 x 1" screws into each windshield bracket. |
| the vehicle body. | • Tighten the screws with a Phillips screwdriver. |
• | Repeat this procedure on the other side of the hood | • Do not |
| area to attach the other hood latch to the vehicle body. |
|
13 Hood |
|
| Tabs |
Slot | Slot |
|
15 | Windshield |
|
| Slots | |
|
| |
| Slots |
|
#10 x 3" Screw | #10 x 3" Screw | |
| ||
| Bracket |
|
•Fit the slots on the back side of the windshield onto the windshield brackets.
•Position the hood over the front of the vehicle body as shown.
•Insert the tabs on the hood into the slots in the vehicle body.
•Close the hood.
•Insert a #10 x 3" screw through the hole in one side of the windshield and through the holes in the hinge bracket.
•Tighten the screw with a Phillips screwdriver. Do not
•Insert a #10 x 3" screw through the hole on the other side of the windshield.
•Tighten the screw with a Phillips screwdriver. Do not
13
