Toddler Bed Assembly
4
Straight Side Rail
Screw Holes
Crimped Mattress Tubes
•Position the other straight side rail so that the screw holes on each straight side rail are on the same side.
Helpful Hint: The assembly of the crimped mattress tubes to the straight side rail is permanent. Once assembled prop- erly, you will be unable to remove the straight side rail.
•Fit the slots and hole in the straight side rail onto the mattress tubes.
•Push down on both ends of the straight side rail to be sure the crimped mattress tubes snap into place.
5 | INCORRECT | CORRECT | |||||||
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal Tab
Showing
•Check to be sure the crimped mattress tubes are inserted properly.
•There is a metal tab on one side of the crimped end. Make sure the metal tab is not showing.
•Pull up firmly on the straight side rail to be sure the mattress tubes are securely in place.
•If the straight side rail can be removed from the crimped
mattress tubes, | 4 . |
6
Crimped Mattress Tube
Mattress Tube
Crimped Mattress Tubes
Curved Ends
Mattress Tube | Curved Side Rail |
•Repeat steps 1 - 5 to assemble the curved side rails and remaining crimped and regular mattress tubes.
•Make sure the curved ends of the curved side rails are on the same side.
7
Straight Side Rail |
| Curved Side Rail |
|
|
|
Straight Side Rail | Curved Side Rail |
•Place both metal frame assemblies on a flat surface.
•Insert the straight side rails into the curved side rails, as
shown.
43
