Assembly
Assembly
Elastic
Loop
Elastic
Loop
25
•Fit the bottom edge of the pad around the bottom edge of the seat.
•Hook the elastic loops on each side of the pad to the peg on the back of the accessory bins.
Mirror Base
26 | Lights ‘n |
Sounds Tray
•Position the lights ‘n sounds tray on a flat surface, with the roller facing you.
•Position the mirror base, with the mirror toward you.
•Fit the mirror base onto the lights ‘n sounds tray.
27
#8 x 13/8” Screw - 4
Shown Actual Size
•Turn the assembly over. Insert four #8 x 13/8" screws into the bottom of the lights ‘n sounds tray and tighten.
Assembly is now complete.
Battery Installation
Hint: When swinging, sound or power L.E.D. slows/dims/stops, it’s time to replace the batteries! We recommend using alkaline batteries for longer battery life.
Battery
Compartment
Door
Swing
•Locate the battery compartment door on the swing frame.
•Insert a coin into the battery compartment door and pry the battery compartment door off of the swing frame.
•Insert four “D” (LR20) alkaline batteries as indicated inside the battery compartment.
•Replace the battery compartment door.
10
