Assembly
M4 Lock Nut |
|
|
Rounded Side |
|
|
|
| Bracket |
|
| Grooves |
Shown Actual Size |
| Tall |
|
| |
|
| End |
Lock Nut | Seat |
|
Tubes | Bottom | |
|
| Edge of |
|
| Seat |
Hexagonal |
|
|
Opening |
|
|
13
•Position the bracket so that the tall end is toward the bottom edge of the seat.
Hint: The M4 lock nuts have been assembled to the bracket at the factory. During shipment of this product, they may have fallen out. Check to be sure there is a lock nut in each hexagonal opening on the bracket. If one (or more) has fallen out, fit the lock nut into a hexagonal opening in the bracket. Make sure the rounded side of the lock nut is facing up.
• Fit the grooves on the bracket to the seat tubes, as shown.
Seat Tubes
Bracket
14 |
M4 Screw - 4
Shown Actual Size
• Insert four M4 screws into the seat tubes and tighten.
Seat
15 Tubes
• Rotate the seat tubes down.
Seat Wire
Bracket Slot
16
• Fit the seat wire through the slot in the bracket as shown.
7
