Assembly
Seat Back | Seat Back |
Pin | Pin |
Opening
Opening
Frame Leg
Seat
Bottom
Assembly
5
•Turn the seat bottom assembly upright.
•Fit the seat back pins into the openings in the top side of the seat bottom assembly.
7
•Pull the frame leg out on each frame to open. Make sure it “clicks” into place.
#10 x 2.2 cm (7/8") |
Black Screw |
SHOWN ACTUAL SIZE
Hinge
Hinge Rod
6
•Turn the seat assembly face down.
•Insert the hinge rod through the hinge on the seat back and seat bottom, as shown.
•Insert a #10 x 2.2 cm (7/8") black screw into the hinge rod and tighten.
•Set the seat assembly aside for Assembly step 10.
5
