Assembly
Front Leg
Holes
Screw Retainers
Base
11
| #10 x 2.2 cm (7/8") | |
Screw Retainer - 2 | Black Screw - 2 | |
SHOWN ACTUAL SIZE | ||
|
•Fit the frame front legs into the other base.
•Fit a screw retainer over a hole in the base.
•Insert a #10 x 2.2 cm (7/8") black screw into the screw retainer and tighten.
•Repeat this procedure to fasten the other end of the base with the remaining screw retainer and #10 x 2.2 cm (7/8") black screw.
Hint: The #10 x 2.2 cm ( 7/ 8") black screws may have been assembled to the screw retainers.
Push Push
Seat Seat
Height Height
Adjuster | Adjuster |
12 | Seat Bottom |
Tube Ends |
| #8 x 1.9 cm (3/4") | |
• Push each seat height adjuster | Screw - 2 | |
SHOWN ACTUAL SIZE | ||
to be sure they are completely | ||
| ||
on the seat bottom tubes. |
|
•Insert a #8 x 1.9 cm (3/4") screw into each seat height adjuster and the ends of the seat bottom tube.
•Tighten the screws.
| #8 x 1.9 cm (3/4") | |
| Screw - 2 | |
| SHOWN ACTUAL SIZE | |
Seat | Seat | |
Height | ||
Height | ||
Adjuster | ||
Adjuster | ||
|
Seat
Bottom
Tube Ends
13 |
Back and |
Bottom View |
•From the back and bottom of the assembly, insert a
#8 x 1.9 cm (3/4") screw through both seat height adjusters and the ends of the seat bottom tube.
•Tighten the screws.
7