Assembly
Upper Swing Arms | Seat Back Tube | |
Buttons | ||
|
7 | Lower Swing Arm Assembly |
(with Restraint System) |
•Fit the lower swing arm assembly to the outside of each upper swing arm.
9 | Swing Arm Short Tubes |
•Position the seat back tube so that it curves toward the back of the swing.
•While pressing the buttons on the seat back tube, fit the seat back tube into the short tubes on the swing arms.
•Push the seat back tube until it “clicks” into place.
•Pull up on the seat back tube to be sure it is secure to the swing arms.
8
•Insert two #6 x 1.9 cm screws through each upper swing arm and into each lower swing arm. Tighten the screws.
5