Assembly
Footrest | Insert Screws Here |
|
Hinge
Hinge Rod
5 | #10 x 2.2 cm Black Screw - 2 |
•Insert two #10 x 2.2 cm black screws through the footrest and into the seat bottom. Tighten the screws.
Seat Back Pin | Seat Back Pin |
Opening | Opening |
6 | Seat Bottom Assembly |
|
•Turn the seat bottom assembly upright.
•Fit the seat back pins into the openings in the top side of the seat bottom assembly.
7
#10 x 2.2 cm Black Screw
•Turn the seat assembly face down.
•Insert the hinge rod through the hinge on the seat back and seat bottom, as shown.
•Insert a #10 x 2.2 cm black screw into the hinge rod. Tighten the screw.
•Set the seat assembly aside for Assembly step 9.
Frame Leg
8
•Pull the frame leg out on each frame to open. Make sure it "clicks" into place.
5