Assembly
Screw Retainers
Base
10
•Insert the frame front legs onto the remaining base.
•Fit a screw retainer over a hole in the front leg.
•Insert a #10 x 2,2 cm black screw through the screw retainer and front leg. Tighten the screw.
•Repeat this procedure to secure the other end of the base with the remaining screw retainer and #10 x 2,2 cm black screw.
Hint: The #10 x 2,2 cm black screws may have been assembled to the screw retainers.
PUSH | PUSH |
Seat Bottom Tube Ends
11
•Push each seat height adjuster to be sure they are completely on the seat bottom tubes.
•Insert a #8 x 1,9 cm screw through each seat height adjuster and the ends of the seat bottom tube. Tighten the screws. This may require extra force.
7
