ASSEMBLYF
Seat Belt
Fasteners
T-Loops
12
•Position both seat belts so that the fasteners face each other, as shown.
•Insert the
•Pull up on the seat belts to secure them to the seat.
B
A
13 | SIDE VIEW |
|
•First, “snap” the front of the seat to the vehicle A .
•Next, “snap” the four tabs near the back of the seat into the matching slots in the vehicle B .
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14 |
|
| LOCKED | UNLOCKED | ||
|
|
|
|
|
|
|
•Using a slotted screwdriver, turn both lock fasteners ¼ turn to the locked position 
.
Handle
Latch
15
•Make sure the front wheels are not turned.
•Locate the latch on the back end of the vehicle.
•Press the tab and slide the latch to open.
•Insert the handle, as shown, and release the tab.
Note: Be sure the end of the handle is clean and free from debris before inserting.
IMPORTANT! If the latch closes, the handle is properly inserted. If it does not, remove the handle and repeat this step.
11 | |
|
|
