ASSEMBLY
CAUTION
This product contains small parts
in its unassembled state. Adult assembly is required.
1 | Posts |
|
2
1
Bases
•Place the bases on a flat surface.
•Note the numbers on the bases and on the posts.
•Insert and “snap” the post labeled 1 into the base labeled 1 .
•Insert and “snap” the post labeled 2 into the base labeled 2 .
2
Printed Side Up
Sleeve
Base Tube
•Place the net, printed side up, on a flat surface.
•Slide the base tube through the sleeve on the bottom of the net.
3
2
Base Tube | 1 |
IMPORTANT! Position the base assemblies as shown. Note the labels 2 and 1 .
• Place the base assemblies onto the ends of the base tube.
3
