ASSEMBLY
12 | Straps | 13 |
|
Plastic Tabs
Front View
• Lift the top of the net.
• Insert the ends of the straps at the top of the net into the slot near the top of each post.
• Feed the end of the strap up through the center slot in the buckle. Then feed the end of the strap down through the slot at the end of the buckle.
Note: Do not completely tighten the straps at this time.
Back View
• From the front of the product, line up the holes in the plastic tabs on the upper end of the net with the holes in each post.
• From the back of the product, insert three #8 x 3/4” screws into each post and tighten.
6
