Assembly
Fork Arms
Fork Cover
Cap
8
Groove
Pedal Axle
10 |
•Place the front wheel assembly between the fork arms. Make sure the pedal axle fits into the groove at the bottom of each fork arm.
•Place a fork cover over the pedal axle on one fork arm.
•Insert two #8 x 3/4" screws through the fork cover and into the fork arm. Tighten the screws with a Phillips screwdriver. Do not
•Repeat this procedure to attach the other fork cover to the other fork arm.
Handlebar
• Insert and “snap” the cap into the hole in the frame. |
Seat Retainer
Seat
Peg
Frame Neck
Fork Post
11
Holes
| Fork Cover |
9 | Rear of Trike |
•Position the seat upside down.
•Fit the small pegs on the seat retainer into the holes in the seat.
•Turn the frame upright.
•Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels.
•Place the handlebar over the fork post and push it down onto the frame. Make sure the handlebar is positioned so that the screw hole faces the rear wheels and aligns with the screw hole in the fork post.
Hint: You may need to rotate the handlebar to align the holes.
•Insert the #8 x 3" screw through the hole in the handlebar and into the fork post. Tighten the screw with a Phillips screwdriver. Do not
6
