Assembly
CAUTION
This product contains small parts
in an unassembled state. Adult assembly is required.
Rear Wheel
Indented Side Down
Hubcap
Straight Axle 
1
•Slide a hubcap (peg side up) onto the straight axle.
•Slide a rear wheel (indented side down) onto the straight axle.
Frame
Hole | Hole |
| Straight Axle |
2 | Bottom View |
•Turn the frame upside down.
•Insert the straight axle through the holes in the rear of the frame.
Rear Wheel |
|
Indented Side Up | Cap Nut |
| |
| Hubcap |
Straight Axle
Frame
Cover
Hubcap
Assembled
Rear Wheel 
3 | Cap Nut | |
Assembly Tool | ||
|
•Place a scrap block of wood on a flat surface.
•Turn the frame on its side with the exposed end of the straight axle up.
•Place the cap nut assembly tool under the assembled rear wheel and onto the cap nut.
•Slide a rear wheel (indented side up) onto the end of the straight axle.
•Slide a hubcap (peg side down) onto the straight axle.
•Place a cap nut on the end of the straight axle.
•Tap the cap nut with a hammer. Gently pull the rear wheel up to be sure the cap nut is securely attached to the straight axle.
•Dispose of the cap nut assembly tool properly.
•Insert one of the tabs on a cover into a slot in the hubcap. Push to "snap" the cover in place. Repeat this procedure to attach the other cover to the other hubcap.
•Set the frame assembly aside.
Pedal Hub | Tab |
| |
Pedal Axle |
|
| Tab |
Slot |
|
| Pedal Hub |
4
•Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub.
3
