Assembly
Pedal Hubs
Pedal Axle
Front Wheel
Hole
5
•While holding the pedal hubs on the pedal axle, insert the pedal axle through the hole in the center of the front wheel.
•Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel.
Pedal Hub
Pedal Axle
Pedal Hub
6
•Turn the front wheel assembly over.
•Insert a pedal hub onto the top of the pedal axle and into the hole in the center of the front wheel.
•Insert the remaining pedal hub below the pedal axle and into the hole in the center of the front wheel.
•Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel.
Pedal
Pedal Axle
Front Wheel Assembly
7
•Place a scrap block of wood under the front wheel assembly with the exposed end up.
•Fit a pedal on the pedal axle.
•Tap the pedal with a hammer until it is secure.
Fork Arms
Fork Cover
Groove
8 | Pedal Axle |
•Place the front wheel assembly between the fork arms. Make sure the pedal axle fits into the groove at the bottom of each fork arm.
•Place a fork cover over the pedal axle on one fork arm.
•Insert two #8 x 3/4" (1,9 cm) screws through the fork cover and into the fork arm. Tighten the screws with a Phillips screwdriver. Do not
•Repeat this procedure to attach the other fork cover to the other fork arm.
4
