Assembly
Rug
Tabs
91
•Position the main assembly and the refrigerator as shown.
•Fit the rug grooves to the tabs on the base of the main assembly and the tab on the base of the refrigerator.
101
• Insert four screws into the rug and tighten.
Arch
(Shapes Side)
Flower
"Light
Bulb"
111 | Kitchen Light |
|
Slot
Slot
121
•Insert and "snap" the arch into the slot in the top of the refrigerator and the countertop.
131
•Insert two screws into the back of the refrigerator, near the clock. Tighten the screws.
Assembly is now complete.
•Position the arch with the shapes facing you. Slide and "snap" the kitchen light to the arch over the "light bulb".
Hint: The kitchen light is designed to be assembled to the arch one way. If it doesn't "snap" onto the arch, turn it around and try again.
•Check to be sure the kitchen light is assembled properly by pulling it down. If you can remove it, please repeat this assembly step.
• Insert and "snap" the flower into the hole in the arch. | 5 |
