ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly re- quires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or to the shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe it off with a soft cloth and mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own Phillips screwdriver

, rubber

.

mallet

, adjustable wrench

, wire cutters

, and needlenose pliers

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. To avoid dam- aging parts, do not use power tools for assembly. Extra hardware may be included.

1/4" Star

 

1/4" Washer

5/16" Star

 

3/8" Star

3/8" Washer

Washer (11)–6

(31)–2

 

Washer (5)–4

Washer (9)–4

 

 

 

 

 

 

 

(10)–2

 

 

1/4" Nut (4)–4

 

3/8" Nut (13)–4

Wheel Spacer

 

 

 

 

 

(83)–4

 

#8 x 1/2"

 

#8 x 3/4"

1/4" x 1/2"

1/4" x 1 1/2" Bolt (3)–6

5/16" x 3/4"

Screw (12)–1

Screw (7)–6

Bolt (6)–4

 

 

Bolt (2)–4

3/8" x 2 1/4" Bolt (8)–6

 

 

 

3/8" x 2 1/2" Bolt (1)–2

6

Page 6
Image 6
ProForm PFT39110.0 user manual Assembly