1.Have a second person hold the Base (85) in the position shown.
Identify the Right Upright (78), which has a square hole near the lower end.
Orient the Right Upright (78) as shown, and attach it to the Base (85) with two 3/8" x 2 1/4" Bolts (8) and two 3/8" Star Washers (9); do not tighten the Bolts yet.
2.Orient the Left Upright (77) as shown, and at- tach it to the Base (85) with two 3/8" x 2 1/4" Bolts (8) and two 3/8" Star Washers (9); do not tighten the Bolts yet.
3.Attach a Wheel (84) to one side of the Base (85) with a 3/8" x 2 1/4" Bolt (8), two Wheel Spacers (83), and a 3/8" Nut (13) as shown. Do not over- tighten the Bolt; the Wheel should turn freely. Attach the other Wheel (84) in the same way.
1
78
85
Square | 9 | 8 |
Hole |
|
|
|
|
| 9 | 8 |
2 | Latch |
|
|
|
|
| Holes |
|
|
|
|
| 77 | 85 |
|
|
|
|
|
|
|
| |
|
|
|
| 9 | 8 |
|
|
|
| 9 | |
3 |
| 83 | 84 | 83 | 8 |
|
| ||||
|
| 85 13 |
|
|
|
| 84 |
|
|
|
|
7
