FASSEMBLY
Pressr Wheel
25 | Lift Steering |
| Column |
•While pressing down on the steering wheel, grasp the steering column under the dash and pull it up as far as it will go.
•Insert the 5/32" x 11/2" pin through the hole in the steering column.
•Grasp the steering column again and pull down to fit the pin into the center of the steering wheel.
Steering
Column Cap
27 |
•Fit the steering column cap onto the end of the steering column.
•Insert a #8 x 3/4" screw through the large opening in the steering column cap and into the hole in the steering column. Tighten the screw.
•Turn the vehicle upright.
Steering Wheel Cap
26 |
•Insert and "snap" the steering wheel cap into the center of the steering wheel.
Key
Assembly
28 |
• Insert and "snap" the key assembly into the slot in the dash.
16 | |
|
|
