Problems & Solutions
Problem | Solution | |
Receiver beeps and displays | Battery pack in receiver is weak or dead. Use AC adaptor as | |
low battery icon | on screen | power source and to charge the battery for four hours. |
|
| |
Transmitter power L.E.D. | Transmitter power is off. Turn transmitter power on. | |
does not light |
|
|
| Loose power cord connection and transmitter power is off. | |
|
| |
|
| Check transmitter power cord |
|
|
|
|
| No power to wall outlet and transmitter power is off. Make sure |
|
| light switch that controls power flow to wall outlet is on. |
|
|
|
|
| Power is off because circuit breaker for baby’s room is off. |
|
| Make sure house fuses and circuit breakers are on. |
|
| |
You can hear conversations or | There is signal interference due to other nursery monitors on | |
sounds from other homes | same channel or cordless telephone use. You may need to pair | |
|
| the receiver and transmitter. Remove the receiver battery door |
|
| and press the pairing button with a paperclip. The power LED |
|
| will blink when the pairing button is released. Then, turn over |
|
| the transmitter and press the pairing button with a paperclip. |
|
| The signal L.E.D. on the receiver will flash and you will hear |
|
| a confirmation tone. |
|
|
|
Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are damaged, please contact
28
