Swing Frame Battery Installation

1,5V x 4

“C” (LR14)

Locate the battery compartment door on the swing frame.

Loosen the screws in the battery compartment door with a Phillips screwdriver.

Insert four “C” (LR14) alkaline batteries.

Hint: We recommend using alkaline batteries for longer battery life.

Replace the battery compartment door and tighten the screws. Do not over-tighten.

If this product begins to operate erratically, you may need to reset the electronics. Turn the power off and then back on.

When motion from the swing becomes slow/faint or stops, it's time to replace the batteries.

Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for

recycling advice and facilities (Europe only).

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

Insert batteries as indicated inside the battery compartment.

Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.

Never short-circuit the battery terminals.

Use only batteries of the same or equivalent type, as recommended.

Do not charge non-rechargeable batteries.

Remove rechargeable batteries from the product before charging.

If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

11

Page 11
Image 11
Fisher-Price T3643 manual Swing Frame Battery Installation, 5V x LR14, Battery Safety Information