Infant Swing Frame One-Time Assembly
Swing Seat Base
1 | Swing Arms |
|
•Slide the longer, straight ends of the swing arms through the holes in the swing seat base.
Hint: The swing arms are designed to fit one way. If a swing arm does not seem to fit, try inserting it into the other hole in the swing seat base.
• Turn the assembly over.
2 Screws
2 Screws
Swing Frame Hubs
3 | BACK VIEW |
•Fit the swing arms into the sockets in the swing frame hubs.
•Turn the assembly around.
2 Screws
2 Screws
2 |
| 4 | FRONT VIEW |
BOTTOM VIEW | • Insert two screws into each hub and tighten. | ||
|
| ||
•Insert two screws into each swing arm and tighten.
•Turn the assembly upright.
8
