Fisher-Price T3643 manual Hints

Infant Swing Use

Seat

Swing Seat Base

3

Hint: If you are converting to an infant swing from high chair or toddler seat modes, remove the seat from the toddler seat base.

•Fit the seat onto the swing seat base.

•Push to “snap” the seat in place. Pull up on the seat to be sure it is secure.

Speed/Power

Switch

4

•Slide the swing speed/power switch ON •.

•Give the seat a light push to start the swinging motion.

•Adjust the swing speed/power switch to the desired swing motion setting.

Hints:

-After turning on power, this product may not swing unless there is a child in the seat.

-As with most battery-power swings, a heavier child will reduce the amount of swinging motion on all settings. In most cases, the low setting works best for a smaller child while the higher setting works best for a heavier child.

-If swinging stops while using a lower setting, try a higher setting. Give the seat a light push to start the swinging motion again.

•Slide the swing speed/power switch OFF when you are finished.

15