Assembly - Stand & Dance
Note: If you are converting the toy from Sit & Play mode to Stand & Dance, first turn the knobs on each side of the keyboard to remove the leg assemblies. Then, press the star buttons to remove the supports from each leg.
2
•Position the keyboard so it is facing up, as shown.
•Align the
symbol on a leg assembly with the
arrow on the keyboard.
• Fit the leg assembly onto the side of the keyboard.
Support
Star Button
Leg
Large Slot
1
•While pressing the star button on a support, fit the end of the support into the large slot in one of the legs, as shown. Make sure you hear a “click”.
•Repeat this procedure to assemble the other support and leg.
Knob
3
•Turn the knob on the leg assembly to secure it to the keyboard.
•Repeat this procedure to assemble the other leg assembly to the keyboard.
6
