Fisher TLS-9960 NOTES:, SERIES RECORDING, Continous Loop Recording Setup, Loop recording connection (example with 2 VCRs)

SERIES RECORDINGContinous Loop Recording Setup

It is possible to configure at least two this VCR for continous loop recording.

Under loop recording when the recording finishes on the first unit, the new recording will start on the second unit. When the recording finishes on the second unit, recording will start on the first unit.

œThe SERIES OUT terminal of VCR No.2 and the SERIES IN terminal No.1 should be connected (See diagram).

1Press the REC/PLAY SPEED l (or j) button to set the recording speed mode.

2Set the following items as indicated.

Item	VCR No.1	VCR No.2
Cassette tape	Loaded	Loaded
Operation mode	Stop	Stop
REPEAT REC switch	OFF	OFF
Counter memory	Canceled	Canceled
“OUTPUT” (in (SET UP	SERIES	SERIES
1) menu)
“TAPE END MODE” (in	REW	REW
(SET UP 3) menu)
“SERIES REC IN” (in	Y (YES)	Y (YES)
(SET UP 3) menu)
Timer recording	OFF (not set)	OFF (not set)
Security lock	Canceled	Set

3Press the REC button on VCR No.1.

øRecording will start in series recording mode.

4Set the security lock on VCR No.1.

NOTES:

œThe “TAPE END MODE” in (SET UP 3) menu should be set to “REW” for both units without fail.

œIn loop recording mode, the tape will be re-recorded over. If you need to keep the recorded infomation, please eject the tape after recording is complete and insert a new tape.

Loop recording connection (example with 2 VCRs)

Monitor TV

Video camera

	To	To VIDEO IN jack		To
VCR No.1	VIDEO IN	VCR No.2		VIDEO OUT
	jack			jack
A RS485 B		A RS485	B
OFF 232 OFF	PUSH	OFF	232 OFF	PUSH
	OPEN			OPEN
AUDIO	VIDEO			VIDEO
REMOTE MIC IN IN OUT	IN OUT		REMOTE MIC IN IN OUT	IN OUT
AC IN ~		AC IN ~
RS232C		RS232C
To			To	To COM
SERIES OUT		SERIES OUT
terminal	To		terminal	terminal
To	VIDEO OUT		To
	jack
SERIES IN		SERIES IN
terminal		terminal
	To COM
	terminal

English 29