Manuals / Brands / TV and Video / VCR / Fisher / TV and Video / VCR

Fisher TLS-9960 SW OUT Terminal, OUTPUT TERMINALS

1 48

Download 48 pages, 413.51 Kb

OUTPUT TERMINALS

SW OUT Terminal

When recording, a pulse signal is output at the SW OUT terminal.

This terminal is usually connected to the switch input (SW IN) of devices like a camera switcher unit, or a quad compressor.

SW OUT Terminal Output Setting

1Press the MENU button until the (SET UP 4) menu is displayed.

øThe FIELD (or FRAME) setting is flashing.

@@@@@@@@<SET@UP@4>

öSW@OUT

@@FIELD@@@@@@@@@01

@@TIMING@@@@@@@@FIELD

@@2H@@@@@@@@@@@@Y

öTHREAD@CHECK@@@Y

öVIDEO@LOSS@@@@@N

öREC@SPEED@@@@@@N

ö1@SHOT@SET

@@FIELD@@@@@@@@@1

@@INTERVAL@@@@@@1M

NOTE:

œIf “TIMING” is set to FRAME (see step 4), “FRAME” will be indicated instead of “FIELD”.

2Turn the SHUTTLE ring, to set the desired pulse signal interval.

Available settings are:

Contents

English Français Español PRECAUTIONS CAUTION For the customers in Canada Location Avoiding Electrical Shock and Fire FEATURES ACCESSORY CONTENTS LOCATIONS OF CONTROLS AND INDICATORS Front Panel Digital Display 1 Operation Indicators Back Panel CONNECTIONS Power Cord Installation About the memory reset TYPES OF ON-SCREENDISPLAYS AND DISPLAY SEQUENCE Using the JOG dial and SHUTTLE ring Language Setting Clock setting SETTING THE LANGUAGE AND CLOCK CHANGING THE ON-SCREENDISPLAY Selecting the On-screenDisplay Changing the Date/Time Display Position VIDEO CASSETTE TAPES Loading Handling Cassette Tapes To Protect your Recordings Unloading Correct tape thread check function Setting the Action to Take When a Cassette is Loaded TAPE MANAGEMENT FUNCTION Setting the Tape Management Function Tape Management Conflict Display NORMAL RECORDING Normal Recording Before starting Record Pause Concerning the Number of Times Tapes can be Rerecorded on Changes to the Recording Speed Mode During Recording Action to Take when the Video Signal Deteriorates Recording Check Clog Detection AUTOREPEAT RECORDING Autorepeat Recording Setting the Mode at the End of the Tape ALARM RECORDING Alarm Recording Setting Alarm Recording Counter Display Connections to the ALARM IN/OUT Terminals ALARM RESET IN terminal Checking the Alarm Recordings Time Alarm Search Alarm Scan PROGRAM TIMER RECORDING PROGRAM TIMER RECORDING Example 2: Setting the Holidays Changing a Program Timer Recording To Cancel a Program Timer Recording To Cancel all Program Timer Recordings Page RECORDING USING AN EXTERNAL TIMER INPUT SERIES RECORDING Series Recording Setup SERIES RECORDING Continous Loop Recording Setup Loop recording connection (example with 2 VCRs) SINGLE IMAGE RECORDING Single Image Recording Setup NORMAL PLAYBACK Normal Playback Tracking Control Vertical Lock Control Sharpness Control SPECIAL PLAYBACK Picture Search (Forward and Reverse) Still Image Frame Advance Reverse Playback Day/Time Search SHUTTLE Ring Operation TAPE COUNTER SETTING THE BUZZER CLOCK ADJUSTMENT SETTING THE RS-232COR RS-485DATA TRANSFER SPEED DIP Switches Setup Data Transfer Speed Setup SETTING THE RS-232COR RS-485DATA TRANSFER SPEED RS485 RJ-11connector layout CHECKING POWER FAILURE, FAILURE DUE TO CONDENSATION AND USAGE DURATION OUTPUT TERMINALS TAPE END OUT Terminal WARNING OUT Terminal TIMER OUT Terminal COM Terminal SW OUT Terminal REMOTE Jack Remote control setting HEADS SWITCHING FUNCTION Switching heads combination and azimuth display MAINTENANCE Daily Inspection Inspection Procedure Periodic Inspection Cabinet Cleaning Maintaining and Checking The Mechanism TROUBLESHOOTING GUIDE After a Power Failure System Down SPECIFICATIONS SANYO INDUSTRIAL VCR WARRANTY