BASIC OPERATION
1 Press the POWER button to turn on the power.
ON: The power is turned on (the POWER indicator is lit). The signals from the channel (A, B or Y/C) which was being used when the power was last turned off will be input.
OFF: The power is turned off (the POWER indicator is off).
Note: If the power for the connected components is not turned on, or if a problem with operation has occurred, “VIDEO LOSS” will appear on the screen. If this happens, check the component connected.
2 Select the audio and video input.
Use the monitor selector buttons (A or B) at the front of the monitor to select the picture being input to either the A or B terminals at the rear of the monitor.
If using the
Note: If there is no signal being input from the input terminals selected (A, B or Y/C) at the rear of the monitor, “NO SIGNAL” will be displayed.
3 Menu screen operations
1Press the OSD button.
The menu screen will be displayed.
The menu screen will only be displayed for about 13 seconds.
2Press the cursor (l) or (j) button.
The cursor will move up or down, so that you can select the desired menu item.
To return to the normal monitor screen
•Press the OSD button once more, or
•Select “EXIT OSD” and then press the ENTER button.
3Select the desired menu item and then press the ENTER button.
If you press the ENTER button repeatedly while the menu screen is being displayed, the display will alternately change between the menu screen and the setting screen. At this time, the menu item will still be selected.
OSD |
|
|
|
|
|
|
| ENTER | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENTER |
|
|
|
|
|
|
|
|
| ENTER | |||||
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENTER |
|
|
|
|
|
|
|
|
|
|
|
|
| ENTER | ||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Normal picture
Note: During this operation, “9. TITLE” and “10. VERSION” will be skipped and the screen will go straight to “EXIT OSD”.
6
