INSTALLING THE BATTERY PACK AND CARD

Install the card

The card can be used after it has been formatted with the camera (page 142).

1 Open the battery/card

1 Open 2 Insert

compartment cover.

 

2 Insert the card.

hFirmly insert the card until it clicks

into place.

 

Card slot

 

3 Close the battery/card

1 Open

 

compartment cover.

2

Push

<When removing the card...>

 

 

h To remove the card, press it

3

Pull out

down, and then release. The card

 

 

will protrude slightly, and you can

 

 

then pull it out.

 

 

CAUTION

Do not attempt to forcibly remove the card.

i Never remove the card when the multi-indicator is flashing red. In doing so, you risk losing the data stored in the card.

HINT

Shooting without a card installed

i When a card is installed, images are recorded to and played back from the card. When no card is installed, images are recorded to and played back from the camera’s internal memory. When the camera is turned on with no card installed, the internal memory icon is shown on the monitor to let you know that the images you capture will be saved to the camera’s internal memory.

25English

Page 38 Page 40
Page 39
Image 39
Fisher VPC-CG6EX, VPC-CG6GX instruction manual Installing the Battery Pack and Card, Install the card
Page 38 Page 40
Top Page Image Contents